This is the print preview of the page.

HDPE
Akafusion

Electrofusion coupler Akafusion

The Akafusion electrofusion couplers are delivered with centre stops. These stops can easily be removed with a knife or screwdriver (200, 250, 315), so that the coupler can be used as a slide-coupler. Before welding, cut pipe ends squarely with a pipe cutting tool, remove the oxide film with a scraper and mark the insertion depth. The couplers can easily be welded with our Akafusion control box and other suitable control boxes.

d1 Art. Nr. D L l1 System EAN kg
40 41 04 95 52 54 22 5A/80s 8716798004381 0,046
50 41 05 95 62 54 22 5A/80s 8716798004398 0,055
56 41 56 95 68 54 22 5A/80s 8716798004404 0,062
63 41 06 95 75 54 22 5A/80s 8716798004411 0,069
75 41 07 95 87 54 22 5A/80s 8716798004428 0,079
90 41 09 95 102 56 22 5A/80s 8716798004435 0,097
110 41 11 95 122 58 22 5A/80s 8716798004442 0,125
125 41 12 95 137 66 22 5A/80s 8716798004459 0,166
160 41 16 95 172 66 22 5A/80s 8716798004466 0,262
200 41 20 65 233 175 31 220V/420s 8716798009270 2,56
250 41 25 65 283 175 31 220V/420s 8716798009287 2,56
315 41 31 65 349 175 31 220V/420s 8716798009294 2,56

This information is produced with extreme care. Akatherm International BV does not accept any liability for damage caused by not or incorrect mentioned data on the product pages. All rights reserved to any modifications.

Links

Downloads

Print

Contact information

Akatherm International BV
Visitor & warehouse address:
Industrieterrein 11
5981 NK Panningen
The Netherlands

Postal address:
P.O. Box 7149
5980 AC Panningen
The Netherlands

Tel:      +31 (0)77 30 88 650
Fax:     +31 (0)77 30 75 232
E-mail:  info@akatherm.nl